Nanostructured BiVO4 Derived from Bi-MOF for Enhanced Visible-light Photodegradation

BiVO4,a promising visible-light responding photocatalyst,has aroused extensive research interest because of inexpensiveness and excellent chemical stability.However,its main drawback is the poor photoinduced charge-transfer dynamics.Building nanostructures is an effective way to tackle this problem.Herein,we put forward a new method to prepare nanostructured BiVO4 from Bi-based metal-organic frameworks[Bi-MOF(CAU-17)]precursor.The as-prepared material has a rod-like morphology inherited from the Bi-MOF sacrificial template and consists of small nanoparticle as building blocks.Compared with its counterparts prepared by conventional methods,MOF-derived nanostructured BiVO4 shows better light absorption ability,narrower bandgap,and improved electrical conductivity as well as reduced recombination.Consequently,BiVO4 nanostructure demonstrates high photocatalytic activity under visible light towards the degradation of methylene blue.Methylene blue can be degraded up to 90%within 30 min with a reaction rate constant of 0.058 min-1.Moreover,the cycling stability of the catalyst is excellent to withstand unchanged degradation efficiency for at least 5 cycles.     

Preparation of aryl azides of aryl boronic acids and one-pot synthesis of 1,4-diaryl-1,2,3-triazoles by a magnetic cysteine functionalized GO–CuI/II nanocomposite

A mixed Cu^I/Cu^IIcatalyst based on magnetic cysteine functionalized graphene oxide (Cu^I/II@Cys-MGO) was prepared and used for the azidonation reaction of aryl boronic acids and one-pot synthesis of 1,4-diaryl −1,2,3-triazoles. Aryl azides were obtained in good yields and short reaction times via cross-coupling of aryl boronic acids with sodium azide in the presence of Cu^II catalytic species in this catalytic system. The azide-alkyne cycloaddition reaction was catalyzed by CuI catalytic species in Cu^I/^II@Cys-MGO nanocomposite.     

Nickel (II) tetrapyridyl complexes as electrocatalysts and precatalysts for water oxidation

Two nickel complexes, [Ni(tpen)](ClO₄)₂.0.5CH₃COCH₃ ( 1 ) and [Ni(tpbn)](ClO₄)₂ ( 2 ), of tetrapyridyl ligands N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,2-ethanediamine (tpen) and N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,4-butanediamine (tpbn) were prepared and their catalysis for water oxidation reaction (WOR) studied. In 0.1 M phosphate buffer solution (PBS) of pH 8.0, complex 1 is a homogeneous molecular catalyst with an overpotential of ~440 mV and a Faradaic efficiency of 89%. At pH ≥ 9.0, complex 1 degraded gradually during the catalytic process and formed NiO_x composite (nickel oxide with general formula Ni_xO_yH_z) active for WOR. In contrast, complex 2 deteriorated under measured conditions (pH 8.0–12.0) and formed NiO_x composite active for WOR. The NiO_x composite derived from 1 in 0.1 M PBS at pH 11.0 showed an activity with an overpotential of ~500 mV, a Tafel slope of ~90 mV/decade and a Faradaic efficiency of 97%. Mechanisms were proposed for water oxidation catalyzed by 1 and 2 . This work revealed that the catalytic activity of the nickel complexes was related to the flexibility of the tetrapyridyl ligands and the adaptability of the coordination sphere of the nickel(II) center.     

Synthesis and characterization of PEGylated iron and graphene oxide magnetic composite for curcumin delivery

Nowadays, nanostructures have been given significant attention in medical and biological fields. Among these nanostructures, graphene oxide (GO) has been widely used in drug delivery systems, because of its unique properties, and the ability to connect to other nanostructures such as magnetic nanoparticles (NPs) as well as polymers by its functional groups. In this research, first, GO was prepared by exfoliating graphite according to the modified Hummer’s method, and then the Fe₃O₄ NPs were synthesized by a simple co-precipitation method on GO nanosheets. In the next step, with the help of the ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reagents, the polyethylene glycol (PEG) polymer was bonded to the GO-Fe₃O₄ nanocomposite. Finally, anti-cancer drug, curcumin (Cur) was loaded onto the nanocomposite and the Cur loading ratio was measured at about 8%. The samples were evaluated using Fourier transform-infrared, differential scanning calorimtery, vibrating-sample magnetometry, atomic force microscopy and dynamic light scattering techniques. The results show that the prepared nanocomposite is an appropriate candidate for biomedical applications.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Influence of bidentate phosphine ligands on the chemistry of [FeFe]-hydrogenase model: insight into molecular structures and electrochemical characteristics

Substitution of carbonyl ligands of the hydrogenase model complex [Fe₂(μ-SeCH₂CH(Me)CH₂Se-μ)(CO)₆] ( A ), by 1,1′-bis (diphenylphosphino)ferrocene (dppf), 1,2-bis (diphenylphosphino)benzene (dppbz) or 1,2-bis (diphenylphosphino)acetylene (dppac) is investigated. It is found that the reaction product depends on the diphosphine used. In the case of dppf, the product is an intramolecular bridged disubstituted complex [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{μ,κ¹,κ¹(P,P)-dppf}] ( 1 ), while the dppac-reaction produces an intermolecular bridged tetra-iron model [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₅]₂{μ,κ¹,κ¹(P,P)-dppac} ( 2 ). However, the dppbz-reaction gives [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{κ²(P,P)-dppbz}] ( 3 ) in which the dppbz ligand is bonded to one Fe atom in a chelated manner. The newly prepared complexes ( 1 – 3 ) have been characterized by elemental analysis, IR, ¹H-, ¹³C{H}-, ³¹P{H}-, ⁷⁷Se{H}-NMR spectroscopy and X-ray structure determination. The electrochemical behavior of 2 and 3 , in absence and presence of acid, is described by cyclic voltammetric measurements in CH₂Cl₂.     

Hydroxylation of Aromatics by H2O2 Catalyzed by Mononuclear Non-heme Iron Complexes: Role of Triazole Hemilability in Substrate-Induced Bifurcation of the H2O2 Activation Mechanism

Rieske dioxygenases are metalloenzymes capable of achieving cis-dihydroxylation of aromatics under mild conditions using O₂ and a source of electrons. The intermediate responsible for this reactivity is proposed to be a cis-Fe^V(O)(OH) moiety. Molecular models allow the generation of a Fe^III(OOH) species with H₂O₂, to yield a Fe^V(O)(OH) species with tetradentate ligands, or {Fe^IV(O); OH^.} pairs with pentadentate ones. We have designed a new pentadentate ligand, mtL₄², bearing a labile triazole, to generate an “in-between” situation. Two iron complexes, [(mtL₄²)FeCl](PF₆) and [(mtL₄²)Fe(OTf)₂]), were obtained and their reactivity towards aromatic substrates was studied in the presence of H₂O₂. Spectroscopic and kinetic studies reflect that triazole is bound at the Fe^II state, but decoordinates in the Fe^III(OOH). The resulting [(mtL₄²)Fe^III(OOH)(MeCN)]²⁺ then lies on a bifurcated decay pathway (end-on homolytic vs. side-on heterolytic) depending on the addition of aromatic substrate: in the absence of substrate, it is proposed to follow a side-on pathway leading to a putative (N₄)Fe^V(O)(OH), while in the presence of aromatics it switches to an end-on homolytic pathway yielding a {(N₅)Fe^IV(O); OH^.} reactive species, through recoordination of triazole. This switch significantly impacts the reaction regioselectivity.     

Synthesis,Crystal Structure,and Magnetic Properties of a New Dinuclear Iron Complex with Schiff Base Ligand

A new dinuclear iron(Ⅲ) complex has been synthesized and structurally characterized by X-ray crystallography: [FeⅢ2(L)(C6H5COO)(SO4)(CH3OH)2]·CH3CN·CH3OH(1, H3 L = N,N'-bis(salicylidene)-1,3-diamino-2-propanol). Complex 1 belongs to orthorhombic space group Pna21 with a = 11.4400(8), b = 22.9705(2), c = 12.5712(9) , V = 3303.5(4) 3, Z = 4, F(000) = 1576, Dc = 1.531 g·cm–3, Mr = 761.36, μ = 1.007 mm–1, S = 1.014, the final R = 0.0505 and wR = 0.1018. The crystal packing is stabilized by intermolecular O–H···O hydrogen bonds, forming an extended one-dimensional chain structure. The temperature dependence of magnetic susceptibility measurement shows that antiferromagnetic interaction is propagated between the metal centers. Fit as dinuclear arrangement gave parameters of J = 19.7 cm-1, g = 1.89 and R2 = 0.9999.     

Simple and Precise Quantification of Iron Catalyst Content in Carbon Nanotubes Using UV/Visible Spectroscopy

Iron catalysts have been used widely for the mass production of carbon nanotubes (CNTs) with high yield. In this study, UV/visible spectroscopy was used to determine the Fe catalyst content in CNTs using a colorimetric technique. Fe ions in solution form red–orange complexes with 1,10-phenanthroline, producing an absorption peak at λ=510 nm, the intensity of which is proportional to the solution Fe concentration. A series of standard Fe solutions were formulated to establish the relationship between optical absorbance and Fe concentration. Many Fe catalysts were microscopically observed to be encased by graphitic layers, thus preventing their extraction. Fe catalyst dissolution from CNTs was investigated with various single and mixed acids, and Fe concentration was found to be highest with CNTs being held at reflux in HClO₄/HNO₃ and H₂SO₄/HNO₃ mixtures. This novel colorimetric method to measure Fe concentrations by UV/Vis spectroscopy was validated by inductively coupled plasma optical emission spectroscopy, indicating its reliability and applicability to asses Fe content in CNTs.     

Experimental and theoretical assessment of Fe-doped indium-oxide-based dilute magnetic semiconductors

Specimens of iron-doped indium oxide (In_1-xFe_x)₂O₃ with x?=?0.015, 0.03, 0.045 and 0.06, amalgamated through a traditional solid-state reaction method followed by H₂/air sintering, were characterised using an X-ray diffractometer (XRD), a vibrating sample magnetometer (VSM), and a scanning electron microscope (SEM) to investigate their structural, magnetic and morphological properties respectively. According to XRD plots, all the specimens exhibit cubic bixbyite structures along with ancillary phases. Magnetic assessment showed that In₂O₃ has a negative susceptibility, exhibiting diamagnetic behaviour at room temperature. The doping of Fe ions induces ferromagnetic (FM) ordering, which is enhanced with increasing doping content. The strength of the magnetisation increases when the specimens are exposed to H₂ but is reduced on further air sintering. A bound magnetic polaron (BMP) model is successfully fitted to the observed FM data involving localised carriers and magnetic cations. A multivariate assessment viz. a hierarchical cluster analysis (HCA) was used to corroborate and strengthen the experimental determined magnetic properties. A homogeneous particle distribution was observed in all SEM micrographs and is validated through MATLAB-based simulation by applying a watershed segmentation algorithm. Surface plots also confirm the change in magnetic properties with increase in doping concentration.